2025 Toyota Tundra recalls
NHTSA lists 5 safety recalls for the 2025 Toyota Tundra, most recently on Feb 9, 2026. Each entry below explains the defect, what can happen, and the free repair.
Is your car already fixed? Recalls are listed by model. Whether your own vehicle has been repaired depends on its VIN: check it on NHTSA's recall lookup or ask any dealer for that brand. Recall repairs are free.
-
Equipment › Other › Labels
Problem: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Toyota Tacoma Hybrid, 2025 Tundra Hybrid, Tundra, 2026 RAV4 Hybrid, 4Runner i-Force Max Hybrid, and 4Runner vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, increasing the risk of a crash.
Fix: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters were mailed October 27, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.
-
Back over prevention › Software
Problem: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Fix: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
-
Exterior lighting › Back up lights
Problem: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Risk: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Fix: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
-
Back over prevention › Software
Problem: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Fix: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
-
Equipment › Other › Labels
Problem: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Fix: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Owner complaints
Owners have filed 144 complaints with NHTSA about the 2025 Toyota Tundra, including 5 involving a crash and 0 involving a fire, with 12 injuries reported. Complaints are unverified reports, not recalls, but clusters can lead NHTSA to open an investigation.
| Component | Complaints |
|---|---|
| Engine | 48 |
| Power train | 38 |
| Fuel/propulsion system | 27 |
| Vehicle speed control | 21 |
| Unknown or other | 17 |
| Electrical system | 14 |
Other Tundra years
Frequently asked questions
How do I know if my 2025 Toyota Tundra has an open recall?
Enter your 17-character VIN on NHTSA's recall lookup or call a dealer. Manufacturers also mail owners when a recall is announced, so keep your registration address up to date.
Do I have to pay for recall repairs?
No. Safety recall repairs are free at any authorized dealer for that brand, even if you bought the vehicle used or the warranty has expired.
Where does this information come from?
From NHTSA, the U.S. agency that oversees vehicle safety recalls. This page is refreshed from its database daily.